Escrito em 01 de setembro de 2021
The Smile Seat Clamp System (SSC System) was designed and developed to be simple, light and functional. It means you do not need extra parts to have your seat tube tighten in the frame, you do not have to worry if the seat will move when the bike falls down or if the clamp screw will break when you’ll tight hard.Filmed and edited by João Soares (corvo v2 frame)Escrito em 30 de agosto de 2021
DESIGNED, DEVELOPED AND PATENTED SYSTEM FROM US IN 2009, PEGUARD IS A ONE PIECE PEG AND HUBGUARD FULLY CNC MACHINED. SAME PEG FITS EVERY FRONT AND REAR HUBS, DRIVE SIDE AND NON-DRIVE SIDE, ALSO EVERY FRAME AND FORK. WITH PEGUARD YOU CAN PROTECT YOUR HUB, SPOKES AND DROPOUTS ON YOUR FRAME & FORK. THAT’S A SIMPLE DESIGN, LIGHT AND SUPER STRONG. MATERIALCNC Machined Alu 7075-T6 SLEEVENylon, Rotate 180º grinding surface with 2 boltsTight by 2 screwsSold separately LENGHT110mm / 4.33″ DIAMETER37.9mm SIZE14mm axle hole with 10mm / ⅜” converter and spacer to use the pegboard at the front hubs FEATURESDeveloped ... Ler maisEscrito em 26 de abril de 2018
Here is a new video showing how to setup our Bionic cranks. SPLINER® is a patented system, tested several times during years and approved. Thicker arms than regular cranks and shorter axle to prevent twisting, also the crank shape, was designed to don’t hit the ankles. Filmed and edited by João Soares